Rotating arm wire rope with annealing separation in 3-8mm thickness, thimble and hook with spring safety device

Our silver galvanized, three-armed steel wire ropes comply with DIN European Standard 12385-4 and are assigned to rope class 18x7, i.e. 18 strands with 7 wires each. Due to the double strand layers in opposite directions, the wire rope exerts a very low torque on an unguided load. The three-strand wire rope is crimped at one end with a DIN 6899 Form B thimble and a silver hook with spring lock. At the other end, the wire rope is annealed to make fixing in a wire rope winch possible without any problems

High minimum breaking load: the minimum breaking load of the three-arm steel wire rope is as follows:

• 3mm: 591kg
• 4mm: 1.049kg
• 5mm: 1.636kg
• 6mm: 2.355kg
• 8mm: 4.194kg

Attention. The payload of the three-armed wire ropes is given with a 5-fold safety factor to the minimum breaking load.

Use as a winch rope: The wire rope is optimally used as a winch or crane rope for lifting and pulling suitable loads, especially at high lifting heights and is used both indoors and outdoors. When using the hoist rope, make sure that the winch diameter is at least 20 times the rope diameter.

If you have any questions or need help, please feel free to contact us by e-mail or phone.