window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments)}; gtag('js', new Date()); gtag('config', 'G-PCL02T57YD',{'send_page_view': false, 'anonymize_ip': true});

Stainless Steel Suspension Cable

Suspension ropes made of stainless steel with a pressed thimble according to DIN 6899 and annealed end in various lengths from 0.5m - 30m, optionally equipped with a wire rope holder with eye plate in the thicknesses of 1.5mm - 8mm permanently & quickly available.

Suspension ropes made of stainless steel with a pressed thimble according to DIN 6899 and annealed end in various lengths from 0.5m - 30m , optionally equipped with a wire rope holder with... read more »
Close window
Stainless Steel Suspension Cable

Suspension ropes made of stainless steel with a pressed thimble according to DIN 6899 and annealed end in various lengths from 0.5m - 30m, optionally equipped with a wire rope holder with eye plate in the thicknesses of 1.5mm - 8mm permanently & quickly available.

No results were found for the filter!
Stainless steel suspension cable 1.5mm 2mm 3mm 4mm 5mm 6mm 8mm Suspension Cable Stainless Steel with Thimble

1.5mm - 8mm thickness
30kg - 700kg payload
1m - 20m length

from €5.80 *
Stainless steel suspension set with wire rope holder Suspension Cable Set Stainless Steel with Cable Gripper Eye Plate

2mm - 3mm thickness
29kg - 33kg payload
0.5m - 30m length

from €9.80 *
Stainless steel cable Suspension cable for wire rope holder Black Suspension Cable Stainless Steel black with Thimble

1.5mm - 6mm thickness
30kg - 400kg payload
1m - 20m length

from €9.80 *

Our suspension ropes are available in galvanised, black and stainless steel, and a suspension system including a suitable wire rope holder can also be purchased. Suspension ropes are mainly produced for use with Wire Rope Gripper especially in stage technology, but can also be used, for example, as a suspension set for canvas walls or similar suitable objects.

The wire rope is crimped on one side with a suitable thimble according to DIN 6899 to protect the wire rope at the load suspension point. On the other side, the wire rope is gloss cut to prevent splicing.

By default we offer 13 different lengths between 0,5m - 20m, of course we are always able to produce special lengths in short production time - please contact us.

.

Basically, a safety factor of 5 applies to swaged suspension ropes, so the minimum breaking load of the individual wire ropes is 5 times the specified payload.