Silver safety rope in 3mm - 10mm thickness, thimble/thimble with two captive quick connect link

Our silver galvanized steel ropes comply with DIN European Standard 13414-1 and are classified as 7x7, 7x19 and 6x19 ropes, which are 6 or 7 strands with 7 or 19 wires each. The safety rope without a damping element is crimped at both ends with a DIN 6899 thimble to protect the wire rope at the load suspension point. In addition, the wire rope is captively connected (up to a thickness of 8mm) at both ends with quick-connect links to DIN 56927 Form B.

BGV C1 guidelines: The Safetys for event technology are produced according to the current DGUV guideline 215 - 313, (formerly BGV - C1 or BGI 810 - 3) and may be used for loads above persons. It should be noted that the safety catch rope must be attached without a possible fall path, if this is not possible, the maximum fall height of the secured work equipment must not exceed 20cm. The safety ropes are also provided with a badge marking that complies with the legal requirements.

Legal working loads: For all pressed Safetys we give working loads, these correspond to table 8 on page 24 of the DGUV guideline (loads over persons).

Tested quality: We use only high-quality industrial steel for our wire ropes. With the help of our own calibrated drop testing machines, we are able to guarantee complete quality assurance. A works certificate according to DIN EN 10204-2.2 or a meaningful test report can be issued for your application.

High-quality quick links: The quick links used comply with DIN 56927 and are used in accordance with the DGUV guidelines on safety at events and productions - loads over persons. With the help of two captive quick links, the Safetys can be attached to the securing element using the two-strand securing method.