Stainless steel wire rope clamps for 2mm - 10mm steel ropes

Our silver salt water resistant wire rope clips comply with DIN European Standard 741 and are used to connect and hold detachable rope end connections with loops or thimbles.

Tested quality: our stainless steel wire rope clamps in stirrup shape are made of high quality V4A AISI 316 stainless steel and can be used for 2mm - 10mm thick steel ropes. With the help of calibrated universal tensile testing machines, the following breaking forces of the wire rope clamps could be determined:

2mm: 280kg

3mm: 601kg

4mm: 1,100kg

5mm: 1.682kg

6mm: 2.446kg

8mm: 3.670kg

10mm: 2.854kg

Attention. The breaking forces of the stainless steel wire rope clamps are given without safety factor. Please add at least a 3-5 times safety factor for your application. The detailed test reports can be found under "Test reports" on the article page. Please note that wire rope clamps according to DIN 741 must not be used for loads above persons, conveyor systems in mining, in rope drives of cranes or for end connections of sling ropes.

Easy handling: Self-assembly of the clamps is possible with the aid of a suitable wrench, two wire rope parts are pressed together by the wire rope clamp during tightening. In addition to the installation instructions in the Technical Details, please also note that the tightening torque of the wire rope clamps must be checked after one week, after one month and then regularly every 6 months.

Versatile applications: Wire rope clips are used to connect and hold detachable rope end connections and are suitable for forming eyelets and loops. Suitable applications for wire rope end connections with wire rope clips are the suspension of static loads as well as one-time lifting operations. Please note that installation should be carried out by competent personnel, taking into account the appropriate safety factors.

Important safety note: Custom-made, bolted rope end connections often do not comply with the DIN European standard.