Silver aluminum ferrule for 1mm - 16mm ropes

Our aluminum crimp clamps comply with DIN European Standard 13411-3 and are used to connect and hold detachable rope end connections with loops or thimbles.

Tested quality: With the help of several own calibrated universal tensile testing machines we are able to guarantee a complete quality assurance. In connection with the hydraulic crimping pliers and the 2-in-1 crimping pliers & wire rope shears from our online store, the following breaking forces (converted into kg) of the crimped wire ropes with aluminum crimping clamps could be determined:

Hydraulic crimping pliers for crimping clamps & terminals:

• 3mm: 428kg
• 4mm: 937kg
• 5mm: 764kg
• 6mm: 1.070kg
• 8mm: 2.854kg
• 10mm: 4.892kg

2-in-1 crimping pliers & wire rope cutter:

• 1.5mm: 41kg (Attention! Crimped with 2mm crimping clamp).
• 2mm: 265kg
• 3mm: 552kg
• 4mm: 981kg

Attention! The breaking forces of the aluminum clamps are given without safety factor. Please note that a suitable safety factor must be included for your application. The detailed test reports can be found under "Test reports" on the article page.

Easy handling: Thanks to the oval shape, wire ropes can be easily threaded during production. It is possible to crimp the wire rope clips with a hydraulic rope crimper. Restricted end connections with rope clamps can be made with the help of impact tools or up to 4mm rope diameter with a vice or crimping pliers.

Important safety note: Custom-made, pressed rope end connections often do not comply with the DIN European standard.