Black safety rope in 3mm - 8mm thickness, thimble with two captive quick connect link

Our black steel ropes comply with the DIN European Standard 13414-1 and are assigned to the rope classes 7x7 and 7x19, these are 7 strands with 7 or 19 wires each. The safety for the event technology is pressed at both ends with a thimble DIN 6899 to protect the wire rope at the load pick-up point. In addition, the wire rope is captively connected on both sides with a quick-connect link each in accordance with DIN 56927 Form B.

BGV C1 guidelines: The Safety safety ropes are produced according to the current DGUV guideline 215 - 313, (formerly BGV - C1 or BGI 810 - 3) and may be used for loads above persons. It should be noted that the safety rope must be attached without a possible fall path; if this is not possible, the maximum fall height of the secured work equipment must not exceed 20cm. In addition, the safety ropes are provided with a badge marking that complies with the legal requirements.

Legal working loads: For all pressed Safetys we give working loads, these correspond to table 8 on page 24 of the DGUV guideline (loads over persons).

Tested quality: We use only high-quality industrial steel for our wire ropes. With the help of our own calibrated drop testing machines, we are able to guarantee complete quality assurance. A works certificate according to DIN EN 10204-2.2 or a meaningful test report can be issued for your application.

High-quality quick links: The quick links used comply with DIN 56927 and are used in accordance with the specifications of the DGUV on safety at events and productions - loads over persons.